Brand
Azonix
\n
BEKA
\n
Cooper Crouse-Hinds
\n
Delta
\n
Electro-Sensors
\n
Elpro
\n
GECMA
\n
Hitrol
\n
KLAE
\n
MTL
\n
Red Lion
\n
RTK
\n
Sanil
\n
SENKO
\n
Sixnet
\n
Toky
\n
Category
Our Products
Page
1
2
3
4
5
6
7
8
Accesorries/ Power Supplies - PSDR
24 Volt Power Supplies @ 1, 2, or 4 A Input and Output Isolation 85 to 264 VAC or 90 to 350 VDC
Accesorries/ Power Supplies - APS/APSIS
Unregulated +12 VDC Supply (APS) Unregulated +24 VDC Supply with Current Sources (APSIS) Octal Plug-in Two 20 mA Current Sources (APSIS)...
Accesorries/ Power Supplies - MLPS1/MLPS2
Micro-line Power Supply Provides Power for the Micro-line Series MLPS1: 12 VDC Output @ 400 mA MLPS2: 24 VDC Output @ 200 mA Easily Att...
Accesorries/ Temperature Sensors - TMP - FIELD CUTTABLE
Field Cuttable Temperature Sensor Probes can be cut from 24" to 3.5" Thermocouple or RTD Measure temperature up to 704° C/1300° F...
Accesorries/ Temperature Sensors - TMP QD
Quick Disconnect Temperature Probes Choice of 304 Stainless Steel, Inconel 600 or XL Sheath Mating Connector (with "write on label") and ...
Accesorries/ Temperature Sensors - TMP/Field Cuttable
Field Cuttable Temperature Sensor Probes can be cut from 24" to 3.5" Thermocouple or RTD Measure temperature up to 704° C/1300° F...
Accessories - XCENET
For use with Data Station Plus and Enhanced Modular Controller Configured using Crimson Software (Version 2.0 or later) 10 Base-T/100 Bas...
Accessories - XCGSM
For use with Data Station Plus and Modular Controller Configured using Crimson Software Installs Inside a Data Station Plus or a Modular ...
Accessories - XCPB
Adds PROFIBUS DP Connectivity to the Data Station Plus and Modular Controller Series PROFIBUS DP Slave Protocol Easy Installation ...
Accessories - XCRS
For use with Data Station Plus and Enhanced Modular Controller (will add additional serial capability) Configured using Crimson Software (...
Accessories/ Current Transformers - CT
Measures heater current up to 50 amps 100 mA AC output for temperature controllers
Accessories/ Current Transformers - APSCM
10 and 100 AMP DC Current Shunts Converts DC Current to DC Millivolts Provides a 0 to 100 Millivolt Output
Accessories/ Current Transformers - CT004
Measures heater current up to 40 amps 100 mA AC output for temperature controllers Small footprint
Accessories/ Current Transformers - CTD
DC Current Transducer Three Jumper Selectable Input Ranges Output is Magnetically Isolated from the Input Internal Power Regulation Spl...
Accessories/ Current Transformers - CTL
AC Current Transducers Average Responding Output: 0-10 VDC or 4-20 mA Jumper Selectable Ranges Output is Magnetically Isolated from the ...
Page
1
2
3
4
5
6
7
8