|
|
Our Products |
|
Page
-
12V DC IS Power Supply-9491-PS
Isolated power supply
Zone 2 & Division 2 mountable
DIN-rail or backplane mounting
ATEX/IECEx certified
FM/FMC approved
200mA @ 10.9V DC- E...
-
9205/9208-ETM Series
- 5 or 8 port managed switch with up to 4 fibre optic ports
- Slim packaging fits on your Din rail
- High performance and value
- Truly industrial ...
-
9208/9210-ETMG series
8 Gigabit ports for 10/100/1000 Ethernet links
4 advanced combination ports accept copper RJ45 or noise-immune fibre optic links up to 80km
fully ...
-
9216-ETM
16 ports of fast 10/100 Ethernet
high port count in a small footprint
easy to configure management functions
monitor port and ring status using M...
-
9218-ETM-2G-2F
18 port including 2 flexible Gigabit combo ports that can be RJ45 copper or fiber optic
high port count in small footprint
easy to configure manag...
-
9226/32-ETZ
Rackmount Ethernet Switches
Expanded connectivity
26/32 total Ethernet ports including
Up to 8 Gigabit ports including 4 combination ports
Up to...
-
9460-ET Series
Cost effective IS Ethernet equipment for Zone 1, Division 1 hazardous areas
Connectivity into Zone 0
Intrinsically safe Power over Ethernet (PoEx)...
-
Accesorries/ Power Supplies - PSDR
24 Volt Power Supplies @ 1, 2, or 4 A
Input and Output Isolation
85 to 264 VAC or 90 to 350 VDC
-
Accesorries/ Power Supplies - APS/APSIS
Unregulated +12 VDC Supply (APS)
Unregulated +24 VDC Supply with Current Sources (APSIS)
Octal Plug-in
Two 20 mA Current Sources (APSIS)...
-
Accesorries/ Power Supplies - MLPS1/MLPS2
Micro-line Power Supply
Provides Power for the Micro-line Series
MLPS1: 12 VDC Output @ 400 mA
MLPS2: 24 VDC Output @ 200 mA
Easily Att...
-
Accesorries/ Temperature Sensors - TMP - FIELD CUTTABLE
Field Cuttable Temperature Sensor Probes can be cut from 24" to 3.5"
Thermocouple or RTD
Measure temperature up to 704° C/1300° F...
-
Accesorries/ Temperature Sensors - TMP QD
Quick Disconnect Temperature Probes
Choice of 304 Stainless Steel, Inconel 600 or XL Sheath
Mating Connector (with "write on label") and ...
-
Accesorries/ Temperature Sensors - TMP/Field Cuttable
Field Cuttable Temperature Sensor Probes can be cut from 24" to 3.5"
Thermocouple or RTD
Measure temperature up to 704° C/1300° F...
-
Accessories - XCENET
For use with Data Station Plus and Enhanced Modular Controller
Configured using Crimson Software (Version 2.0 or later)
10 Base-T/100 Bas...
-
Accessories - XCGSM
For use with Data Station Plus and Modular Controller
Configured using Crimson Software
Installs Inside a Data Station Plus or a Modular ...
Page |
|
|
|
|
|
|
|
|
|
|