|
 |
Our Products |
 |
Page
-
Process I/O™- Zone 1 Installation - MTL8000 1/1 Power Supplies
The Power supply modules convert locally available 24Vdc to a high-frequency bus that in turn powers the I/O modules and their field circuits.
The po...
-
Process I/O™- Zone 1 Installation- MTL8000 1/1 Bus Interface Module (BIM)
The Bus Interface Module (BIM) supports connection to Profibus-DP masters. The LAN medium is implemented as intrinsically safe RS485, supported via an...
-
Process I/O™- Zone 1 Installation- MTL8000 1/1 Field Enclosure
Enclosure type 863-EN-16 is designed to accommodate a complete MTL8000 1/1 node with up to 16 I/O modules in a Zone 1 hazardous area.
It has integral...
-
Process I/O™- Zone 1 Installation- MTL8000 1/1 IS Isolator
The 856-IS-DP provides a barrier between RS485 and RS485-IS to interface Standard Profibus DP and Intrinsically Safe Profibus DP.
With two IS channel...
-
Process I/O™- Zone 1 Installation- MTL8000 1/1 Modules
A wide range of I/O modules is offered including AI, AO, DI, DO, temperature input functions and pulse frequency. Each module handles 4 I/O channels (...
-
Process I/O™- Zone 1 Installation- MTL8000 Node Services Carrier
The Node Services Carrier accommodates primary and redundant power supplies, primary and redundant BIMs and up to 16 I/O modules, providing up to 128 ...
-
Process I/O™- Zone 2 Installation range- MTL8000 2/1 Modules
All I/O modules are connected to a high speed Bus Interface Module (BIM) via a proprietary bus system called "Railbus" and one BIM can control up to 3...
-
Process I/O™- Zone 2 Installation range- MTL8000 Field Terminals
-
Process I/O™- Zone 2 Installation- MTL8000 Modules Carriers and Cables
Carriers are the building blocks on which the MTL8000 system is assembled. They distribute ...
-
Process I/O™- Zone 2 Installation- MTL8000 Software
The 8455 software is one of the methods for configuring Profibus and Modbus Bus Interface Modules (BIMs) in an MTL Process I/O™ node. It runs on...
-
Process I/O™-Zone 2 Installation range - MTL8000 Railbus Isolator
The Railbus Isolator module provides galvanic isolation between the 2/2 and 2/1 sections of the Railbus, thus preventing fault voltages on the general...
-
Process I/O™-Zone 2 Installation range-Bus Interface Modules (BIM’s)
An MTL8000 node uses a Bus Interface Module (BIM) to communicate with the host controller via a local area network (LAN). Different BIMs can be chosen...
-
Product Families - G3 Kadets
Touchscreen HMIs that strike the perfect balance of advanced features and value.The G3 Kadet series of operator interface panels offer a host of funct...
-
ProPanel® MP2030C
• 15” display• sunlight-viewable, night-dimmable• versatile, easy-connect I/O• minimal temp rise, longest availableservice l...
-
Rack Shield Series
The Rackshield surge protection solution provides modular protection for up to 12 ports in a 19” rack format. Modules slide into RackSheild prov...
Page |
|
|
|
|
|
|
|
|
|
|